This is the 4th webinar of the CelPlan Webinar Series
If you missed this webinar and/or wish to view it again, please click on the video link below. We are also providing the slides and a FAQ of questions we received from the attendees of the webinar.
Mobile user devices, connections and data consumption are expected to grow exponentially over the next few years.
Revenues from mobile subscriptions are decreasing while subscriber growth, demand and usage are increasing. At the same time, mobile operators are expected to ensure their networks are able to meet the increasing demand needed to safeguard their market share & revenue streams.
Most operators are looking at 4G as a natural evolution and a solution capable of meeting this exponential growth & traffic demand.
LTE specifies several measurements to be done at UE and at Network level. Each measurement has precision limitations which need to be understood before taking decision based on the values reported.
CelPlan is please to provide this Free, Educational Webinar on "LTE Measurements, What they Mean and How they are Used".
In our session, we will discuss:
- UE Measurements
- RSRP
- RSSI and its variations
- RSRQ and its variations
- RSTD
- RX-TX Time Difference
- Network Measurements
- Reference Signal TX Power
- Received Interference Power
- Thermal Noise Power
- RX-TX Time Difference
- Timing Advance
- Angle of Arrival
- Measurement Reporting
- Intra-LTE
- Inter-RAT
- Event triggered
- Periodic
Specialized measurements should be performed to characterize the network RF characteristics:
- 1D Measurements
- RF propagation model calibration
- Receive Signal Strength Information
- Reference Signal Received Power
- Reference Signal Received Quality
- Primary Synchronization Signal power
- Signal power
- Noise and Interference Power
- Fade Mean
- 2D Measurements
- Primary Synchronization Signal Power Delay Profile
- 3D measurements
- Received Time Frequency Resource Elements
- Channel Frequency response
- Channel Impulse Response
- Transmit Antenna Correlation
- Traffic Load
- Measurement based predictions
This webinar is part of a series of webinars on LTE and 4G Technologies in general. Each webinar topic is different from the other, but the series is designed in such a way that each webinar builds upon and complements the foundation of the previous webinar.
Next webinar of the CelPlan Webinar Series: What LTE Parameters need to be Dimensioned and Optimized |
