CellWireless SM is spectrum monitoring equipment used by spectrum regulators to verify compliance with spectrum licensing. It has Centralized Controller (CC) and Remote Unit (RU).
Allows monitoring of spectrum usage from 20 MHz to 18 GHz. The equipment can capture up to 40 MHz of spectrum at a time, digitize and process it. The captured spectrum is time and place stamped.

The information collected can be used to locate unauthorized transmitters through triangulation using TDOA (time difference of arrival). This triangulation requires at least three pieces of equipment and gives an approximate approximation of the transmitter’s location, which needs to be refined using other techniques not supported by the transmitter, such as AoA.

Location accuracy ranges from a hundred meters to a thousand meters, depending on the relative position of the monitoring stations and transmitter.

CellWireless RU equipment is fully integrated into a single unit and can be remotely controlled from a Centralized Controller.

1. Specifications
Operating range: 20 MHz to 18 GHz
Maximum spectrum capture bandwidth: 40 MHz
RF receiving antennas: 2 omnidirectional antennas
Noise figure: ≤ 20 dBm @ 2.4 GHz
Third order intercept: ≥ +13 dBm @ 2.4 GHz
GNSS antenna: GPS
Timestamp: UTC with ± 25 ppb
Processor: 4 cores, 8 threads, clocked at 2GHz / 3.2GHz, 16GB 2.4GHz memory and up to 1TB of SSD storage, 2x 10GB Ethernet, 4x USB 3.1 Gen2, 4 HDMI (4,096× 2,160 to 60 Hz)
Ethernet Switch: 5 x 1Gb Ethernet port
Communications: GSM / GPRS / EDGE, WCDMA / HDSPA / HSUPA, LTE Modem @ 824 at 2,620 GHz, Dual SIM, up to 100 Mbps, Wi-Fi optional (802.11b / g / n)

2. Measurements
Measurement schedule: defined by user-defined script, with various bandwidth ranges and user-defined periodicity
Emission detection: user defined absolute level (dBm) or level above noise floor (dB)
Emission power measurement: dBm
Emission bandwidth measurement: Hz
Occupancy Issue Time: % of time
Emissions storage: energy, bandwidth, occupancy and I/Q
Preview: real time or playback
Display: Frequency x Amplitude, Time x Amplitude, Time x Amplitude x Frequency (Waterfall)

3. Packing
CellWireless SM RU is packaged in two carrying cases that include accessories and tools necessary for field deployment of the unit.

CellWireless SM

Test and Measurement